Cincinnerdi Tech Stuff

A mind-numbing read if ever there was one

Archive for the ‘Win SBS 2003’ Category

We still need floppies? Seriously, Microsoft?!

with 2 comments

Only one installation issue

The end of a long marathon, migrating to SBS 2008

Running SBS 2008 migration on a virtual server takes us on a detour down memory lane

Working on a migration of Windows Small Business Server (SBS) 2003 to SBS 2008, I had jumped thru the previous 283 migration hoops (I exaggerate, but just a little) and was ready to boot the 2008 installer DVD with my handy SBSAnswerFile which Microsoft wants me to put on “…the root of a USB drive, floppy disk or a partition on the destination server.” Hmmm….

– USB drive is a no-go on the ESX server.
– Let’s put it on a 2nd virtual hard disk. No, the migration installer didn’t “see” it.
– OK, let’s put it on a virtual CD drive. No. It didn’t see it again.
– Finally, I went to the extra hassle of putting it on a virtual floppy. Success!

The blow by blow follows:

Read the rest of this entry »

Advertisements

Written by scottledyard

2010, March 4th at 7:00 pm

Level Platforms install does it all, but must add MWService to admin groups

with 2 comments

Summary:
While installing Level Platforms (LPI) Onsite Manager onto a Windows Server 2003 (a member server running on as and ESXi guest and added to a SBS 2003 domain) all went well, but one service would not start. Final, solution was that the MWService account did not have sufficient permissions. LPI tech support said to add that account to Administrators, Domain Administrators and Enterprise Administrators. This solved the problem.

Details:
Read the rest of this entry »

Written by scottledyard

2008, December 17th at 12:09 pm

Setting incoming SMTP port on SBS / Exchange

leave a comment »

Having set up my SBS server some time ago, I couldn’t remember where I had set the incoming port number (falsely called 65535 here.) I find the button that pops open the dialog box for this quite forgettable, so I’ll document this here hoping to help someone — me included — in the future.

Running TCPView from SysInternals shows that inetinfo.exe is listening on port 65535.

TCPView from SysInternals shows the listening port for SMTP

This was set in Exchange System Manager, drilling down seven levels to the SMTP-Default, right-clicking Properties, Advanced and editing the incoming port number. By default, this is port 25 for SMTP.
Drill WAY down to change properties, advanced...

Written by scottledyard

2008, April 28th at 3:58 pm

Posted in Security, SMTP, Win SBS 2003

Tagged with

99% isn’t good enough for a burned CD-ROM from an ISO – Using CRC305.EXE

leave a comment »

In this post, I tell how to detect if a Windows installation CD is bad using the CRC305.EXE.

Recently I again downloaded Microsoft’s Small Business Server 2003 CD ISO images and began burning them to CD on my laptop. To be sure they’re good, The MS download manager checks that the CRC values check. I have the Sonic software verify the CD after the burn to make sure it’s burned properly. Should be okay, right?

Nope.

Ran through two complete installations of SBS only to find during and after CD #4 there are setup errors. The first indicates that a file for what appears to be a Korean help file just doesn’t exist. It’s one of two files, so I tried just copying and renaming the one file to be the name it wanted for the second file. I knew this was cheating, but what are the chances I’ll ever want help in Korean. It continues on until a final error indicates it cannot proceed. The errorlog.txt file showed numerous errors besides this one.

After re-burning CD 1 at a slower speed, I found I had the same error. I downloaded and ran CRC305.EXE from Microsoft’s web site and ran it against the CD on my laptop. It indicated that it was good. However, running it on the server on which I was trying to load the CDs indicated that ALL of the CDs had an error after the 99% point!

So I burned the CDs on THAT machine (yes there was a lot of time involved with this!), ran CRC205.EXE on that machine and it showed that the disks passed. I was able to install the complete system with the new CDs without errors.

Written by scottledyard

2007, July 22nd at 10:38 am

Posted in Win SBS 2003

Windows 2003 Small Business Server – Client Setup

leave a comment »

sbslogo.gif

For posterity sake, here are the screen shots for setting up client computers from an SBS server. I decided to include the initial user setup which provides for an automatic “next step” of setting up the computer. So there are two “push” parts: User setup and client computer setup and two “pull” parts: Assigning user to the computer / migrating their profiles and installing software via the Client Setup Wizard

Part I

Read the rest of this entry »

Written by scottledyard

2007, July 16th at 1:54 pm

%d bloggers like this: